China othomathike holimo le tlase ho thunngoa lehlabathe ho bōpa mochine

Tlhaloso e Khutšoanyane:

E amohela sebopeho sa mehala e mene ea seteishene se le seng kapa se habeli 'me ho bonolo ho sebelisa HMI.
Bophahamo bo feto-fetohang ba hlobo bo eketsa chai ea lehlabathe.
Khatello ea Extrusion le lebelo la ho etsa li ka fapana ho hlahisa hlobo ea ho rarahana ho fapaneng.
Boleng ba ho bopa bo fihla sehlohlolong tlas'a khatello e phahameng ea hydraulic extrusion.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Re natefeloa ke boemo bo botle haholo pakeng tsa bareki ba rona bakeng sa boleng ba sehlahisoa sa rona se setle, theko e mabifi hammoho le ts'ehetso e ntle ka ho fetisisa bakeng sa mochini oa lehlabathe o otlolohileng le o tlase oa China, Khamphani ea rona e ntse e fana ka "moreki pele" mme e ikemiselitse ho etsa joalo. ho thusa bareki ho holisa mokhatlo oa bona, e le hore e be Mookameli e Moholo!
Re natefeloa ke boemo bo botle haholo pakeng tsa bareki ba rona bakeng sa boleng ba sehlahisoa sa rona se setle, theko e mabifi hammoho le tšehetso e ntle ka ho fetisisa bakeng saChina Automatic Sand Molding Machine, Ka phihlelo ea lilemo tse fetang 9 le sehlopha se tšoanelehang, re rometse thepa ea rona linaheng tse ngata le libakeng tse ngata lefatšeng ka bophara.Re amohela bareki, mekhatlo ea likhoebo le metsoalle ho tsoa likarolong tsohle tsa lefats'e ho ikopanya le rona le ho batla tšebelisano-'moho molemong oa bobeli.

Likaroloana

Mochini oa Mold Molding oa Servo Top and Bottom Shooting Sand Molding Machine

1.E amohela sebopeho sa seteishene se le seng kapa se habeli-seteishene sa mehala e mene mme ho bonolo ho sebetsa HMI.
2.Bophahamo ba hlobo bo feto-fetohang bo eketsa chai ea lehlabathe.
Khatello ea 3.Extrusion le lebelo la ho theha li ka fapana ho hlahisa hlobo ea ho rarahana ho fapaneng.
Boleng ba 4.Molding bo fihla tlhōrōng ea eona tlas'a khatello e phahameng ea hydraulic extrusion.
5.Ho tlatsa lehlabathe ka mokhoa o ts'oanang ka holimo le ka tlase ho tiisa ho thatafala le botle ba hlobo.
6.Setlhophiso sa Parameter le ts'ebetso ea ho thunya / ho lokisa mathata ka HMI.
7.Automatic blowout ente demolding hydraulic system optimizes tlhahiso.
8.Lubricating guide column e lelefatsa bophelo ba tšebeletso le ho ntlafatsa ho nepahala ha mohlala.
9.Paneli ea Operator e ka ntle ho netefatsa polokeho ea mokhanni.

Lintlha

Mehlala

JND3545

JND4555

JND5565

JND6575

JND7585

Mofuta oa lehlabathe (bolelele)

(300-380)

(400-480)

(500-580)

(600-680)

(700-780)

Boholo (bophara)

(400-480)

(500-580)

(600-680)

(700-780)

(800-880)

Sand size Height (e telele ka ho fetisisa)

holimo le tlase 180-300

Mokhoa oa ho Bopa

Pneumatic Sand Blowing + Extrusion

Lebelo la ho bopa (ho sa kenyeletsoe nako ea litlhophiso tsa mantlha)

26 S/mokgwa

26 S/mokgwa

30 S/mokgwa

30 S/mokgwa

35 S/mokgwa

Tšebeliso ea Moea

0.5m³

0.5m³

0.5m³

0.6m³

0.7m³

Mongobo wa Lehlabathe

2.5-3.5%

Phepelo ea motlakase

AC380V kapa AC220V

Matla

18.5kw

18.5kw

22kw

22kw

30kw

Khatello ea Moea ea Tsamaiso

0.6 mpa

Khatello ea Sisteme ea Hydraulic

16 mpa

Setšoantšo sa Feme

Mochini oa ho bopa oa lehlabathe oa servo holimo le tlase.

Mochini oa Mold Molding oa Servo Top and Bottom Shooting Sand Molding Machine

Juneng Mechini

1. Re ba bang ba bahlahisi ba seng bakae ba metjhini e thehiloeng China e kopanyang R&D, moralo, thekiso le tšebeletso.

2. Lihlahisoa tse ka sehloohong tsa k'hamphani ea rona ke mefuta eohle ea mochine oa ho bopa o itekanetseng, mochine o tšelang o itekanetseng le mohala oa kopano oa mohlala.

3. Lisebelisoa tsa rona li tšehetsa tlhahiso ea mefuta eohle ea li-castings tsa tšepe, li-valve, likarolo tsa likoloi, likarolo tsa lipeipi, joalo-joalo Haeba u hloka, ka kopo ikopanye le rona.

4. Khampani e thehile setsi sa tšebeletso ea morao-rao le ho ntlafatsa tsamaiso ea litšebeletso tsa theknoloji.Ka sete e felletseng ea mochini le lisebelisoa tsa ho lahla, boleng bo holimo ebile bo theko e tlase.

1
1af74ea0112237b4cfca60110cc721a1.E amohela sebopeho sa seteishene se le seng kapa se habeli-seteishene sa mehala e mene mme ho bonolo ho sebetsa HMI.
2.Bophahamo ba hlobo bo feto-fetohang bo eketsa chai ea lehlabathe.
Khatello ea 3.Extrusion le lebelo la ho theha li ka fapana ho hlahisa hlobo ea ho rarahana ho fapaneng.
Boleng ba 4.Molding bo fihla tlhōrōng ea eona tlas'a khatello e phahameng ea hydraulic extrusion.
5.Ho tlatsa lehlabathe ka mokhoa o ts'oanang ka holimo le ka tlase ho tiisa ho thatafala le botle ba hlobo.
6.Setlhophiso sa Parameter le ts'ebetso ea ho thunya / ho lokisa mathata ka HMI.
7.Automatic blowout ente demolding hydraulic system optimizes tlhahiso.
8.Lubricating guide column e lelefatsa bophelo ba tšebeletso le ho ntlafatsa ho nepahala ha mohlala.
9.Paneli ea Operator e ka ntle ho netefatsa polokeho ea mokhanni.


  • E fetileng:
  • E 'ngoe: